Are you tackling a project that requires cutting through a lot of metal? Step away from the saw, and get it done faster and easier with the Pro-Series Plasma Cutter. Increase your productivity and save the saw blades. A duty cycle of 35% @ 40A means this plasma cutter will cut continuously for 3.5 minutes when cranked up to the maximum amperage before needing to cool down. Cuts through 3/8 inch mild steel, 1/4 inch aluminum, 1/4 inch stainless steel, 1/4 inch galvanized metal, 1/8 inch copper, and 1/8 inch brass. Includes everything you need to get started: 18.5 Ft CuttingTorch, 10 Ft Earth Cable With Clamp, 3 Pieces Nozzle, 3 Pieces Electrode.

• Single Phase 230V-60HZ, 25A Max, Output 120V DC
• Duty Cycle 35% at 40A, No-load Voltage 340V
• Air Pressure 4.5 CFM@ 60 PSI
• Working Air Pressure Range = 40-90 PSI
• Pilot Arc Feature Cuts Expanded Metal
• IGBT Inverter Plasma Cutter With Thermal
• Overload Protection And Built-in Gas Regulator