Features and Benefits:

• Trivalent zinc plating for durability and resistance to corrosion
• exceeds 72-hour salt spray test
• Angle of 45 degrees for easier access to fitting
• 3/8" hex size
• 1/4"-28 special taper threading for an untapped recommended hole size of .230" to .235", creating a leak-proof seal



"ALEMITE" THREAD FORMING FITTINGThread-forming fittings have special tapered drive threads to reshape the material in an untapped hole to provide a leakproof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread-forming fittings can be replaced by any standard threaded fitting or by another thread-forming fitting.Highlights: Type: 45Thread: 1/4"-28 Spl. TaperHex Size: 3/8"230 - .235 Hole size recommended.Threads provide strong seal Exceeds 72-hour salt-spray test Maximum pressure: 8,000 psi


Length 6.5in. X Width 4.25in. X Height 4.25in.